Issues The Feed
Hello Contractor News

OSHA's heat enforcement program now targets residential builders and specialty trades

OSHA's heat emphasis program targets residential builders and specialty trades, with inspections on 80°F heat-index days. Here's how small crews can prepare.

Construction workers at an OSHA safety training on a Georgia jobsite. Photo: U.S. Department of Labor (public domain)

Federal heat inspections aren't just a summer headline anymore; they're on the calendar for the next five years. In April, OSHA rolled out a revised National Emphasis Program on outdoor and indoor heat hazards that took effect immediately and puts residential building construction and the main specialty trades on its target list (via OSHA).

The directive, CPL 03-00-024, replaced OSHA's original 2022 heat emphasis program. It ran through this past summer and is set to stay in place for up to five years unless OSHA cancels or extends it.

Who's on the list. OSHA picked 55 high-risk industries using Bureau of Labor Statistics injury and illness data from 2021 through 2024 and its own inspection and citation data from 2022 through 2025. Eight construction industry codes made the cut: residential building construction; nonresidential building construction; utility system construction; highway, street and bridge construction; foundation, structure and building exterior contractors; building equipment contractors; building finishing contractors; and other specialty trade contractors. That covers most framers, roofers, siding crews, HVAC and electrical shops, drywall and painting contractors, and site-prep outfits. Land subdivision and other heavy civil work aren't on it.

When inspectors show up. The directive defines a "heat priority day" plainly: "A heat priority day occurs when the heat index for the day is expected to be 80°F or more." On those days, OSHA says compliance officers will expand inspections wherever there's evidence of heat hazards, and will keep doing outreach. On any day the National Weather Service issues a heat warning or advisory for an area, the directive says programmed inspections "shall occur" in the targeted industries. For construction, those inspections are drawn from lists of worksites rather than employers.

What they look at. According to the directive, inspectors will review OSHA 300 logs and 301 incident reports for heat-related illness, look at records of emergency visits and ambulance transports, and interview workers about symptoms like headaches, dizziness and fainting, including new and returning workers. The directive's checklist for evaluating a heat program asks questions such as whether there was "sufficient amounts of cool water easily accessible to the employees" and whether the employer "provide[d] time for acclimatization of new and returning workers." It also covers rest breaks, shade, training and whether someone on site is responsible for heat safety.

There's still no federal heat standard. OSHA's proposed heat rule was published in August 2024, and its rulemaking page shows post-hearing comments closed Oct. 30, 2025, with no final rule listed. Until a standard is final, OSHA cites heat hazards under the General Duty Clause. Several states, including California, Washington, Oregon, Minnesota and Colorado, have their own heat rules, according to OSHA's heat page.

Law firms that advise employers on safety, including Haynes Boone and Beveridge & Diamond, said in April alerts that the revised program trims the target list by about 30% from the 2022 version while keeping construction squarely in it.

OSHA's release also points small and medium-sized businesses to its On-Site Consultation Program. It's free and confidential, run by state agencies or universities, and separate from enforcement.

Why it matters for Contractors

The summer is over, so this is the right time to get a heat plan on paper before next season. If you run a small residential crew, you don't need a binder. You need a written routine your foreman actually follows: water on site, shade or a cool spot for breaks, more frequent rest when the heat index climbs, a lighter first week for new hires and anyone coming back from time off, and a quick training on the signs of heat illness.

Write down what you do. If an inspector shows up on a heat-advisory day, the questions will be about those exact things, and your 300 log will be one of the first documents they ask for.

If you'd rather have someone walk your sites with you, request a free On-Site Consultation visit through your state's program. The program is kept separate from OSHA enforcement.