Makita has two new everyday drills for its 18V LXT battery platform: the XFD17 1/2-inch driver-drill and the XPH17 1/2-inch hammer driver-drill. The company announced both Nov. 3 from its U.S. headquarters in La Mirada, Calif., and says they've been released (via Makita).
These aren't specialty tools. They're the kind of drill that rides in every truck, and Makita is pitching them on power for their size.
"Makita continues to expand the 18V LXT System and is introducing two new brushless compact drilling and fastening tools with more power, balance, and speed," said Robert Monroe, Makita U.S.A.'s product manager for drilling, fastening and expansion.
Both tools run on a Makita-built brushless motor rated for up to 580 inch-pounds of maximum torque. Both have a two-speed transmission, 0 to 500 and 0 to 1,900 RPM, a 1/2-inch keyless chuck and a 20-position clutch. Makita lists the capacity at 1/2 inch in steel and 1-1/2 inches in wood.
The difference is the hammer mode. The XFD17 has two modes, drilling and driving. The XPH17 adds hammer drilling, rated at 0 to 7,500 and 0 to 28,500 blows per minute, and is rated for 1/2-inch holes in masonry.
Makita says both weigh 3.7 pounds with a fully charged 3.0Ah battery. The release lists both at 6-9/16 inches long, though Makita's own product pages list the XPH17 at 6-3/4 inches. Both have LED lights and a rubberized grip, and both work with Makita's Star Protection batteries, which talk to the tool to guard against overloading, over-discharging and overheating.
Makita's product pages list each tool as a bare tool (XFD17Z and XPH17Z) and as a kit with one 3.0Ah battery and a tool bag (XFD17S1 and XPH17S1) (Makita XFD17S1). Makita's pages don't show prices.
At least one dealer, Tool Nut, has the XFD17S1 kit listed at $189 on preorder, with an estimated ship date of Nov. 17, and its listing includes a charger in the kit (via Tool Nut). Prices at your local dealer may differ.
Makita also announced a compact 1/2-inch impact wrench, the XWT20, the same day for the same battery platform.
Why it matters for Contractors
If your crew already runs Makita 18V batteries, these are easy to slot in. Bare tools let you add a drill without buying more batteries, and the 3.7-pound weight with a 3.0Ah pack is light enough for overhead work and a full day of hanging hardware or setting boxes.
The choice between the two is simple. If anyone on your crew drills into block, brick or concrete even occasionally, for anchors or conduit straps, the XPH17's hammer mode saves you from grabbing a separate tool for small holes. If you're mostly in wood and steel, the XFD17 does the job without the extra mode.
The bigger decision is the battery platform, not the drill. If you're on another brand, a single drill isn't a reason to switch. But if your shop is already split across brands, it's worth standardizing when you replace tools, so every battery on the truck fits every tool.
As always with a new model, check the spec sheet and price at your own dealer before you buy. Makita's own numbers vary slightly between the release and its product pages.